Analisis Pengaruh Peralatan Bongkar Muat, Waktu Tunggu Truck , Kinerja Operator Bongkar Muat, Dan Tenaga Kerja (TKBM) Terhadap Produktivitas Bongkar Muat Batubara Di Pelabuhan Cirebon

Studi Kasus Pada PT. Bira Bumi Persada

Authors

  • Adenanthera Lesmana Dewa Universitas Maritim AMNI
  • Uut Dwi Karningsih Universitas Maritim AMNI
  • Retno Mulatsih Universitas Maritim AMNI

DOI:

https://doi.org/10.32585/jbfe.v2i2.4591

Abstract

Productivity of loading and unloading is one of the problems that always gets serious attention in every country, especially regarding sea transportation. Sea transportation is a meeting point for areas that are far from the center of activity, especially in supporting economic activities. with the port, economic activities canbecome smoother, most of the export and import goods are sent by sea because the number of goods that can be transported by ships is more than the number of goods that can be transported by other fleets. if the port's performance is less than optimal, it will have a direct impact on revenue so that it will cause new problems,namely a decrease in loading and unloading productivity. This study, Coal Loading and Unloading Productivity is influenced by several factors including loading and unloading equipment, truck waiting time, loading and unloading operator performance, and labor (TKBM) from these four factors which have an important role in increasing loading and unloading productivity. The population in this study were employees/employees and TKBM and service users at PT. Bira Bumi Persada with a research sample of 60 respondents. The data analysis used in this study was descriptive analysis and quantitative analysis, the data were analyzed using multiple linear regression analysis with the help of (software) Statistical Package For Social Science (SPSS) version.26. The results of the research by partially testing the t-test hypothesis showed that loading and unloading equipment, truck waiting time, loading and unloading operator performance, and labor (TKBM) had a positive and significant effect on coal loading and unloading productivity.

Downloads

Download data is not yet available.

References

Bambang suryantoro dkk ,(2020). “Tenaga kerja, peralatan bongkar muat lift on/off, dan Efektivitas lapangan penumpukan terhadap produktivitas Bongkar muat peti kemas”. Jurnal Baruna Horizon Vol. 3, No. 1, Juni 2020. STIE Kasih bangsa jakarta.

Frilia Esti Anggraeni dan Indriyani. 2016. “Faktor-Faktor yang mempengaruhi produktivitas bongkar muat batubara pada pelabuhan tanjung intan cilacap”. Saintara:Jurnal ilmiah ilmu-ilmu maritim. ISSN : 2528-6676

http://jdih.dephub.go.id/assets/uudocs/permen/2014/PM_60_Ta hun_2014.pdf

Https://pelindo.co.id/port/pelabuhan-cirebon Https://shipsapp.co.id/artikel/sejarah-pelabuhan-

cirebon.html

Hendra, Gunawan. (2008) “Analisis faktor-faktor yang berpengaruh terhadap produktivitas bongkar muat kontainer di Dermaga Berlian Surabaya studi kasus (PT. Pelayaran Meratus)”. Undergraduate thesis, Widya Mandala Catholic University Surabaya.

Larsen Barasa, dkk.(2018). “Pengaruh penggunaan peralatan bongkar muat terhadap produktivitas bongkar muat di PT. Pelindo II cabang pontianak”. Jurnal Meteor STIP Marunda, Volume 11 Nomor 2, ISSN : 1979-4746

Peraturan Pemerintah RI No. 69 Tahun 2001, Tentang Kepelabuhanan.

Pratama, Eka Matius, A. A., Pujo Eka dan Novianto Iful. ( 2017). “Pengaruh Utilitas Alat Continuous Ship Unloaders Terhadap Produktivitas Bongkar Muat Curah Kering (Phospate Rock) di Pelabuhan Khusus Petrokimia Gresik”. Jurnal Aplikasi Pelayaran dan Kepelabuhan, Volume7, Nomor 2, Maret.

Referensi kepelabuhanan seri 3 2000. pengoperasian pelabuhan. Direktorat Jenderal perhubungan laut jakarta,2000

Rini Setiawati, dkk. (2017) “Utilitas quay container crane dan terhadap produktivitas bongkar muat petikemasterhadap effective time di terminal operasi 3 Pt. Pelabuhan tanjung priok”. Jurnal manajemen Bisnis transportasi dan logistk, Vol. 4 No. 1September 2017. STMT Trisakti

Selasdini,Vidya, Barsa, Larsen dan Wartono. (2018). “Pengaruh Ketersediaan Utilitas Alat Bongkar Muat Pelabuhan Terhadap Kinerja Produktivitas Di Pelabuhan Batu Ampar” Jurnal Ilmiah Nasional Sekolah Tinggi Ilmu Pelayaran Jakarta Vol, 11, No 2, Desember.

Sugiyono. (2017). Metedologi Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Alfabeta Bandung.

Sugiyono. (2019). Metode Penelitian Pendekatan Kuantitatif, Kualitatif dan R&D Badan Penerbit Alfabeta. Bandung

Sugiyono 2017. Populasi dan sampel. Alfabeta,CV Sugiyono (2017). Teknik Probability sampling. Alfabeta,CV

Undang-Undang Nomor 17 Tahun (2008). Tentang pelayaran Denny J. Najoan, Deshalena Ayu Rachma Putri, 2016 “Produktivitas Bongkar Muat dan Waktu Sandar Kapal Pelabuhan Tanjung Emas” Institut Transportasi dan Logistik Trisakti

Haris, dkk, 2017 “Peranan Kinerja Operator Terhadap Kelancaran Kegiatan Bongkar Muat Perusahaan Freight Forwading” Jurnal Manajemen Bisnis

Transportasi dan Logistik , Vol.3 No.3 Mei 2017.

Iqbal Hasan, Misbahuddin, 2014. “Analisis Data Penelitian Dengan Statistik”.Badan Penerbit PT. Bumi Aksara. Jakarta. Oktober 2014.

Yusfita Chrisnawati dan Roy Bagas Wiyanto, 2016 “Pengaruh Idle Time Terhadap Produktivitas Bongkar Muat Pada PT. Mustika Alam Lestari”. Jurnal Logistik D III Transportasi UNJ, Volume IX No.1. April 2016.

Singgih Santoso. 2018. Menguasai SPSS Versi 26. PT. Elex Media Komputindo Kelompok Gramedia, Anggota IKAPI, Jakarta 2018.

Juli Prastyorini dan Seprianor, 2017 “Sistem Kerja Terusan dan Borongan Terhadap Produktivitas Kegiatan Bongkar Muat”. Sekolah Tinggi Ilmu Administrasi dan Manajemen Kepelabuhanan (STIAMAK) Barunawati Surabaya.

Published

2021-12-30

How to Cite

Dewa, A. L., Uut Dwi Karningsih, & Retno Mulatsih. (2021). Analisis Pengaruh Peralatan Bongkar Muat, Waktu Tunggu Truck , Kinerja Operator Bongkar Muat, Dan Tenaga Kerja (TKBM) Terhadap Produktivitas Bongkar Muat Batubara Di Pelabuhan Cirebon : Studi Kasus Pada PT. Bira Bumi Persada. Journal of Business, Finance, and Economics (JBFE), 2(2), 89–96. https://doi.org/10.32585/jbfe.v2i2.4591